-
5 TIPS for Small Batch 3D Printing Manufacturing – AT HOME!
I’m spending A LOT of time small batch 3d printing manufacturing AT HOME. I sort of fell into this opportunity, and I thought I would give you some tips based on my experience.
-
Show & Telling – Nerding Out with the 3DPN Crew
Sean, David, and I all wanted to catch up and have some fun over video chat. Why not do it here, and with some nerdy things to share?
-
After The Five – Stacking Prints
You need to be logged in to view this content. Please Log In. Not a Member? Join Us
-
3D Printing Puppy Dog Prosthetics, Mandalorian PPE, Math Powered Jewelry // Today In 3D Printing
Let’s talk about 3D PRINTED DOG PROSTHETICS, how The Mandalorian inspired a face shield deisng, and we see MATH POWERED JEWELRY thanks to 3D PRINTING! 0:23 – 3d printed dog prosthetics 2:29 – Mandalorian inspired face shields 5:33 – Math Powered Jewelry thanks to 3D PRINTING 3D PRINTED DOG PROSTHETICS: https://bionicpets.org/ https://www.divedesignco.com/work/bionic-pets https://gcreate.com MANDALORIAN FACE SHIELD: https://makerforce.org/ https://team2471.org/ https://www.facebook.com/groups/pdx3dplab MATH…
-
Does My Hamster Care About 3D Printing? Practical Prints for Pets!
3D Printing is WONDERFUL, it’s true. However, do hamsters care about 3d printing? Let’s see if this hamster cares about 3d printing when we 3D PRINT a food container for it! Practical printing for PETS! Under quarantine, I thought this would be a creative way to utilize 3d printing. Find out if the hamster thought so too 🙂 #3dprinting #quarantine…
-
Stacking 3D Prints – Does It Work? – THE CONCLUSION
Finally – the end! You’ve made it. Does stacking 3d prints work? I demonstrate for the camera how I’m able to separate the stacked prints. This is part of a series, start here: https://youtu.be/UeKfZ5r9s9s MANTA RAY FACE SHIELD ON PRUSAPRINTERS.ORG https://www.prusaprinters.org/prints/28352-manta-ray-face-shield-v6-prusa-3dverkstan-remix FACE SHIELDS AND STACKING PRINTS https://youtu.be/UeKfZ5r9s9s STACKING IN CURA https://youtu.be/ediRzElyc-0 STACKING IN IDEAMAKER https://youtu.be/rEBN7UgBiVs STACKING IN PRUSA SLICER https://youtu.be/RAciAS1ssuc…
-
HOW TO STACK 3D PRINTS in PRUSA SLICER
If you’re looking how to stack prints in Prusa Slicer, I’ll show you how it’s done! This is part of a series, start here: https://youtu.be/UeKfZ5r9s9s MANTA RAY FACE SHIELD ON PRUSAPRINTERS.ORG https://www.prusaprinters.org/prints/28352-manta-ray-face-shield-v6-prusa-3dverkstan-remix FACE SHIELDS AND STACKING PRINTS https://youtu.be/UeKfZ5r9s9s STACKING IN CURA https://youtu.be/ediRzElyc-0 STACKING IN IDEAMAKER https://youtu.be/rEBN7UgBiVs STACKING IN PRUSA SLICER https://youtu.be/RAciAS1ssuc STACKING IN SIMPLIFY3D https://youtu.be/DYDkUi6ERqU DID THE STACKING WORK? https://youtu.be/RLP8RvIIum8…
-
HOW TO STACK 3D PRINTS in SIMPLIFY3D
Here is how you can stack prints in Simplify3D. This is part of a series, start here: https://youtu.be/UeKfZ5r9s9s MANTA RAY FACE SHIELD ON PRUSAPRINTERS.ORG https://www.prusaprinters.org/prints/28352-manta-ray-face-shield-v6-prusa-3dverkstan-remix FACE SHIELDS AND STACKING PRINTS https://youtu.be/UeKfZ5r9s9s STACKING IN CURA https://youtu.be/ediRzElyc-0 STACKING IN IDEAMAKER https://youtu.be/rEBN7UgBiVs STACKING IN PRUSA SLICER https://youtu.be/RAciAS1ssuc STACKING IN SIMPLIFY3D https://youtu.be/DYDkUi6ERqU DID THE STACKING WORK? https://youtu.be/RLP8RvIIum8 You can support what we do in…
-
HOW TO STACK 3D PRINTS in IDEAMAKER
Here is how I stack prints using ideaMaker! This is part of a series, start here: https://youtu.be/UeKfZ5r9s9s MANTA RAY FACE SHIELD ON PRUSAPRINTERS.ORG https://www.prusaprinters.org/prints/28352-manta-ray-face-shield-v6-prusa-3dverkstan-remix FACE SHIELDS AND STACKING PRINTS https://youtu.be/UeKfZ5r9s9s STACKING IN CURA https://youtu.be/ediRzElyc-0 STACKING IN IDEAMAKER https://youtu.be/rEBN7UgBiVs STACKING IN PRUSA SLICER https://youtu.be/RAciAS1ssuc STACKING IN SIMPLIFY3D https://youtu.be/DYDkUi6ERqU DID THE STACKING WORK? https://youtu.be/RLP8RvIIum8 You can support what we do in many…
-
HOW TO STACK 3D PRINTS in CURA
Stacking prints in Cura is easy, and I take you through the simple steps to make it happen. This is part of a series, start here: https://youtu.be/UeKfZ5r9s9s MANTA RAY FACE SHIELD ON PRUSAPRINTERS.ORG https://www.prusaprinters.org/prints/28352-manta-ray-face-shield-v6-prusa-3dverkstan-remix MAKE ANYTHING (DEVIN) STACKING VIDEO https://www.youtube.com/watch?v=MHKBvk8IAc0 FACE SHIELDS AND STACKING PRINTS https://youtu.be/UeKfZ5r9s9s STACKING IN CURA https://youtu.be/ediRzElyc-0 STACKING IN IDEAMAKER https://youtu.be/rEBN7UgBiVs STACKING IN PRUSA SLICER https://youtu.be/RAciAS1ssuc STACKING…
-
Face Shields and Stacking Prints – Cura, ideaMaker, Simplify3D, Prusa Slicer [YOU CHOOSE]
Stacking Prints is a super cool thing to do, and it’s very popular with Face Shields right now. I wanted to dive in and find out how to stack prints using various slicers, so this is what I came up with. Also, I love the 3DVerkstan face shield model, and I love the Prusa face shield model. I smashed them…
-
3D Printing Face Masks, 3D Printing Glass, and Proper Printing // Today In 3D Printing
Today In 3D Printing is back! We are talking about 3d printing face masks thanks to make the masks and StormeTech, we dive into how maple glass is 3d printing WITH glass, then I get to chat with Jon at Proper Printing about his 3d printer modifications! 3D Printing Face Masks: https://www.makethemasks.com https://www.stormetech.com 3D Printing Glass: https://twitter.com/MapleGlass3DP https://techcrunch.com/2018/12/31/mit-researchers-are-now-3d-printing-glass/ https://www.machinedesign.com/3d-printing-cad/article/21836643/lab-scientists-successfully-print-glass-optics https://www.nature.com/articles/d41586-019-03473-9…
